Hitachi SB10YI 4 by 8 inch Belt Disc Sander with Dust Collection

Features Hitachi Power Tools introduces the all new SB10Y 4 x 8 inch Belt Disc Benchtop Sander with on-board dust collection. Belt is 4 x 36 inches and can be used in the horizontal position or locked in vertical position. Changing the abrasive belt is easy and fast by removing the side cover and releasing the belt tension control. Belt tracking adjustments are simple too using the thumb wheel. The belt platen area is 5 x 9 inches when using the workstop. Belt speed is 1850 Feet per Minute. The belt assembly also features an idler drum for contour sanding. The disc is 8 inches in diameter with a speed of 3000 RPM. The 6 x 9 inch cast iron table tilts up to 45 degrees with a scale showing angle of tilt; table can be used with either the belt or disc, and includes a miter gauge slot with miter gauge. On-board dust collection system pulls sawdust from the belt and disc areas and deposits it into a 30 micron bag with zipper for easy disposal of sawdust. Powered by a 1/3 HP, 5.5 amp induction motor. Footprint (inches): 10 width x 17 depth (with belt in upright position). Motor: 1/3 HP, 5.5 amp, continuous duty, induction-type, 120v, 60 Hz, 3450 RPM Belt 4 x 36 in, Platen 5 x 9 in, Speed 1850 FPM, Easy belt change and tracking Disc 8 in dia, balanced, PSA abrasive, 3000 RPM Table 6 x 9 in, cast iron, 45 degree tilt Includes: Table assembly, Miter gauge, Dust collection bag, Abrasives - 1 PSA cloth disc 8in 100 grit; 1 cloth belt 4 x 8in 100 grit (Amazon)